tiresizeinches.com

Metric tire size · 20 in wheel

295/65R20 tire size in inches and millimeters

mm, 115–395
% of width
inches

Reading 295/65R20. Change any field and the gauge follows.

Overall diameter

35.10in

A 295/65R20 tire stands 35.10 in (891.5 mm) tall, which makes it a 35-inch tire, 0.10 in over.

Section width
11.61 in295 mm
Sidewall
7.55 in191.8 mm
Wheel
20 in508.0 mm
295/65R20 drawn to scaleA 295/65R20 tire drawn to scale, seen from the side and head-on at one scale. Four dimension lines label the overall diameter 35.10 in, the wheel diameter 20 in, the sidewall height 7.55 in and the section width 11.61 in. Every one of those values is stated in text on this page.35.10 in20 in wheel7.55 in11.61 in
Drawn to scale. Hover or focus a row in the equivalents table to lay that size over this one.

Full specification

295/65R20 — one measurement per row, in both unit systems
Dimension Inchesin Millimetersmm
Overall diameter35.10891.5
Section width11.61295.0
Sidewall height7.55191.8
Wheel diameter20.00508.0
Circumference110.262,800.7
295/65R20 — the quantities that are not one measurement in two units
QuantityValueUnit
Revolutions574.6per mile
Revolutions357.0per kilometer
Aspect ratio65% of section width
ConstructionRradial

Sizes that will do the same job

Where every equivalent size falls inside the tolerance bandA horizontal scale running from three percent under to three percent over the 295/65R20 overall diameter of 35.10 in. Each of the 10 sizes in the table is drawn as a tick at its own difference; the pointer marks 275/70R20 at +0.17%. Every plotted value is a row of the table below.−3−2−10123SHORTERTALLER275/70R20 · +0.17%
The scale is percent difference in overall diameter against 35.10 in. Every mark is a row of the table below, at its own distance from it.

10 sizes in this table are within ±3% of 35.10 in. A positive difference is taller than 295/65R20; every sign is printed as well as colored.

The most searched equivalents of 295/65R20, 10 listed, sorted by how far each is from 35.10 in. Open a row for its section width and speed.
Size Overall diameterin Difference vs 295/65R20% of diameter, then inches Actual speedmph at an indicated 60
35.16 +0.17% +0.06 in 60.1
34.88 −0.62% −0.22 in 59.6
35.35 +0.73% +0.26 in 60.4
34.61 −1.40% −0.49 in 59.2
34.59 −1.46% −0.51 in 59.1
35.61 +1.46% +0.51 in 60.9
35.71 +1.74% +0.61 in 61.0
34.41 −1.96% −0.69 in 58.8
34.07 −2.92% −1.02 in 58.3
36.12 +2.92% +1.02 in 61.7

The next sizes up and down

One width step and one profile step either side of 295/65R20, on the same wheel.
Size Overall diameterdifference % and inches Section widthvs 295/65R20, then mph at an indicated 60
narrower285/65R20 34.59−1.46% −0.51 in −0.39 in59.1 mph actual
wider305/65R20 35.61+1.46% +0.51 in +0.39 in60.9 mph actual
lower profile295/60R20 33.94−3.31% −1.16 in 0.00 in58.0 mph actual
taller profile295/70R20 36.26+3.31% +1.16 in 0.00 in62.0 mph actual