tiresizeinches.com

Metric tire size · 18 in wheel

295/70R18 tire size in inches and millimeters

mm, 115–395
% of width
inches

Reading 295/70R18. Change any field and the gauge follows.

Overall diameter

34.26in

A 295/70R18 tire stands 34.26 in (870.2 mm) tall, which makes it a 34-inch tire by diameter, 0.26 in over.

Section width
11.61 in295 mm
Sidewall
8.13 in206.5 mm
Wheel
18 in457.2 mm
295/70R18 drawn to scaleA 295/70R18 tire drawn to scale, seen from the side and head-on at one scale. Four dimension lines label the overall diameter 34.26 in, the wheel diameter 18 in, the sidewall height 8.13 in and the section width 11.61 in. Every one of those values is stated in text on this page.34.26 in18 in wheel8.13 in11.61 in
Drawn to scale. Hover or focus a row in the equivalents table to lay that size over this one.

Full specification

295/70R18 — one measurement per row, in both unit systems
Dimension Inchesin Millimetersmm
Overall diameter34.26870.2
Section width11.61295.0
Sidewall height8.13206.5
Wheel diameter18.00457.2
Circumference107.632,733.8
295/70R18 — the quantities that are not one measurement in two units
QuantityValueUnit
Revolutions588.7per mile
Revolutions365.8per kilometer
Aspect ratio70% of section width
ConstructionRradial

Sizes that will do the same job

Where every equivalent size falls inside the tolerance bandA horizontal scale running from three percent under to three percent over the 295/70R18 overall diameter of 34.26 in. Each of the 10 sizes in the table is drawn as a tick at its own difference; the pointer marks 275/75R18 at −0.06%. Every plotted value is a row of the table below.−3−2−10123SHORTERTALLER275/75R18 · −0.06%
The scale is percent difference in overall diameter against 34.26 in. Every mark is a row of the table below, at its own distance from it.

10 sizes in this table are within ±3% of 34.26 in. A positive difference is taller than 295/70R18; every sign is printed as well as colored.

The most searched equivalents of 295/70R18, 10 listed, sorted by how far each is from 34.26 in. Open a row for its section width and speed.
Size Overall diameterin Difference vs 295/70R18% of diameter, then inches Actual speedmph at an indicated 60
34.24 −0.06% −0.02 in 60.0
34.12 −0.40% −0.14 in 59.8
34.63 +1.09% +0.37 in 60.7
34.69 +1.26% +0.43 in 60.8
33.71 −1.61% −0.55 in 59.0
34.81 +1.61% +0.55 in 61.0
34.83 +1.67% +0.57 in 61.0
33.65 −1.78% −0.61 in 58.9
33.61 −1.90% −0.65 in 58.9
33.35 −2.64% −0.91 in 58.4

The next sizes up and down

One width step and one profile step either side of 295/70R18, on the same wheel.
Size Overall diameterdifference % and inches Section widthvs 295/70R18, then mph at an indicated 60
narrower285/70R18 33.71−1.61% −0.55 in −0.39 in59.0 mph actual
wider305/70R18 34.81+1.61% +0.55 in +0.39 in61.0 mph actual
lower profile295/65R18 33.10−3.39% −1.16 in 0.00 in58.0 mph actual
taller profile295/75R18 35.42+3.39% +1.16 in 0.00 in62.0 mph actual