tiresizeinches.com

Metric tire size · 16 in wheel

315/75R16 tire size in inches and millimeters

mm, 115–395
% of width
inches

Reading 315/75R16. Change any field and the gauge follows.

Overall diameter

34.60in

A 315/75R16 tire stands 34.60 in (878.9 mm) tall, which makes it a 35-inch tire, 0.40 in under.

Section width
12.40 in315 mm
Sidewall
9.30 in236.2 mm
Wheel
16 in406.4 mm
315/75R16 drawn to scaleA 315/75R16 tire drawn to scale, seen from the side and head-on at one scale. Four dimension lines label the overall diameter 34.60 in, the wheel diameter 16 in, the sidewall height 9.30 in and the section width 12.40 in. Every one of those values is stated in text on this page.34.60 in16 in wheel9.30 in12.40 in
Drawn to scale. Hover or focus a row in the equivalents table to lay that size over this one.

Full specification

315/75R16 — one measurement per row, in both unit systems
Dimension Inchesin Millimetersmm
Overall diameter34.60878.9
Section width12.40315.0
Sidewall height9.30236.2
Wheel diameter16.00406.4
Circumference108.712,761.1
315/75R16 — the quantities that are not one measurement in two units
QuantityValueUnit
Revolutions582.9per mile
Revolutions362.2per kilometer
Aspect ratio75% of section width
ConstructionRradial

Sizes that will do the same job

Where every equivalent size falls inside the tolerance bandA horizontal scale running from three percent under to three percent over the 315/75R16 overall diameter of 34.60 in. Each of the 6 sizes in the table is drawn as a tick at its own difference; the pointer marks 295/80R16 at −0.06%. Every plotted value is a row of the table below.−3−2−10123SHORTERTALLER295/80R16 · −0.06%
The scale is percent difference in overall diameter against 34.60 in. Every mark is a row of the table below, at its own distance from it.

6 sizes in this table are within ±3% of 34.60 in. A positive difference is taller than 315/75R16; every sign is printed as well as colored.

The most searched equivalents of 315/75R16, 6 listed, sorted by how far each is from 34.60 in. Open a row for its section width and speed.
Size Overall diameterin Difference vs 315/75R16% of diameter, then inches Actual speedmph at an indicated 60
34.58 −0.06% −0.02 in 60.0
35.19 +1.71% +0.59 in 61.0
34.01 −1.71% −0.59 in 59.0
35.21 +1.76% +0.61 in 61.1
33.95 −1.88% −0.65 in 58.9
33.91 −1.99% −0.69 in 58.8

The next sizes up and down

One width step and one profile step either side of 315/75R16, on the same wheel.
Size Overall diameterdifference % and inches Section widthvs 315/75R16, then mph at an indicated 60
narrower305/75R16 34.01−1.71% −0.59 in −0.39 in59.0 mph actual
wider325/75R16 35.19+1.71% +0.59 in +0.39 in61.0 mph actual
lower profile315/70R16 33.36−3.58% −1.24 in 0.00 in57.8 mph actual
taller profile315/80R16 35.84+3.58% +1.24 in 0.00 in62.2 mph actual